The three ways the world measures fuel economy
Fuel economy is usually expressed in one of three ways: miles per gallon (MPG), litres per 100 kilometres (L/100km), or kilometres per litre (km/L). They describe the same relationship between distance and fuel, yet they present it from different directions. That is why a vehicle can appear to have a large number in one system and a small number in another without anything about the vehicle changing.
MPG and km/L are distance-per-fuel measures. Higher is better because the vehicle travels farther on each gallon or litre. L/100km is a fuel-per-distance measure. Lower is better because the vehicle uses fewer litres to travel a fixed 100 kilometres. Our MPG to L/100km converter is useful when a listing uses US MPG and you want the consumption format used in many other countries.
In general, the United States uses MPG based on the US gallon. The United Kingdom uses MPG based on the UK imperial gallon in marketing and road tests, although fuel there is sold in litres. Most of Europe, official Canadian figures, Australia and China use L/100km. Japan, India, Pakistan, Bangladesh and much of Latin America commonly use km/L. These are broad conventions, not a guarantee that every advert or instrument panel follows the same convention.
The word is written litre in British English and liter in US English. The unit is the same; the spelling is not another conversion problem.
US and UK gallons: why UK MPG reads about 20% higher
The two MPG systems do not use the same gallon. One US gallon equals 3.785411784 litres. One UK imperial gallon equals 4.54609 litres. Since the imperial gallon contains more fuel, a car travelling the same distance with the same actual fuel consumption produces a higher number when measured in UK MPG.
The relationship is exact in the calculator: MPG (UK) = MPG (US) × 1.20094993. The reverse is MPG (US) = MPG (UK) × 0.83267418. The headline difference is often described as roughly 20%, but use the formula rather than treating 20% as a precise multiplier. Compare a 40 MPG (US) claim with a 40 MPG (UK) claim and they are not equal: 40 MPG (US) is 5.88 L/100km, while 40 MPG (UK) is 7.06 L/100km.
If you are looking at an imported car or a report that does not specify the gallon, do not guess. Convert it with the US MPG to UK MPG converter or the UK MPG to US MPG converter first. Then make the comparison in one consistent unit.
Why L/100km is an inverse unit
L/100km asks how much fuel is needed to cover a fixed distance. Because fuel use is in the numerator, a smaller number indicates better economy. The link between L/100km and km/L is reciprocal: km/L = 100 ÷ L/100km, and L/100km = 100 ÷ km/L. For example, 20 km/L equals 5 L/100km.
This inverse relationship explains why the mental habits developed with MPG can mislead. Doubling MPG does not simply halve a displayed MPG number; it halves the litres used per 100 kilometres. A L/100km to km/L converter makes that change explicit, while the km/L to L/100km converter returns to the consumption view.
Every conversion formula
The table below uses the fixed definitions of one mile = 1.609344 kilometres, one US gallon = 3.785411784 litres, and one UK imperial gallon = 4.54609 litres. The calculator keeps full precision for its calculation and rounds only the displayed result.
| Starting unit | Convert to | Formula |
|---|---|---|
| MPG (US) | L/100km | L/100km = 235.214583 ÷ MPG (US) |
| MPG (US) | km/L | km/L = MPG (US) × 0.425143707 |
| MPG (US) | MPG (UK) | MPG (UK) = MPG (US) × 1.20094993 |
| MPG (UK) | L/100km | L/100km = 282.480936 ÷ MPG (UK) |
| MPG (UK) | km/L | km/L = MPG (UK) × 0.35400619 |
| MPG (UK) | MPG (US) | MPG (US) = MPG (UK) × 0.83267418 |
| L/100km | MPG (US) | MPG (US) = 235.214583 ÷ L/100km |
| L/100km | MPG (UK) | MPG (UK) = 282.480936 ÷ L/100km |
| L/100km | km/L | km/L = 100 ÷ L/100km |
| km/L | MPG (US) | MPG (US) = km/L × 2.35214583 |
| km/L | MPG (UK) | MPG (UK) = km/L × 2.82480936 |
| km/L | L/100km | L/100km = 100 ÷ km/L |
You need not work through these formulas by hand for routine conversions. Use the dedicated tools when you have a particular pair of units: convert L/100km to US MPG, convert UK MPG to L/100km, convert L/100km to UK MPG, convert US MPG to km/L, or convert km/L to US MPG. The unit labels in the tool are part of the calculation, so choose them carefully.
Quick mental-math approximations
Approximations are handy at the roadside, but they are only approximations. For a quick US MPG to L/100km estimate, divide 235 by the MPG figure. For UK MPG, divide 282 by the MPG figure. For km/L to L/100km, divide 100 by km/L. The exact calculator constants give a better answer when comparing close figures or costing a long trip.
You can also use a rough relationship of 1 km/L being about 2.35 MPG (US) or about 2.82 MPG (UK). The precise versions are in the km/L to UK MPG converter and the UK MPG to km/L converter. Do not round an intermediate conversion too aggressively. A small rounding difference can be visible after you convert again.
Why MPG gains are not linear
MPG is intuitive because higher is better, but equal MPG increases do not save equal amounts of fuel. The reciprocal formula reveals the difference. At 10 MPG (US), consumption is 23.52 L/100km. At 20 MPG, it is 11.76 L/100km. At 30 MPG, it is 7.84 L/100km. At 40 MPG, it is 5.88 L/100km.
Moving from 10 to 20 MPG saves 11.76 litres per 100 kilometres. Moving from 30 to 40 MPG saves only 1.96 litres per 100 kilometres. This does not make higher MPG unhelpful. It means that L/100km often gives a clearer view of the fuel difference between vehicles, especially when comparing already efficient cars. You can place several figures into the fuel economy comparison tool to see them normalised before ranking.
Official test cycles: EPA, WLTP and NEDC
Official ratings make it easier to compare vehicles tested under the same framework, but the framework matters. EPA ratings are the standard US ratings. In Europe, WLTP replaced NEDC for new type approvals from 2017 to 2018. WLTP is generally closer to real-world driving than the older NEDC procedure, but neither rating can reproduce every driver’s roads, temperature, traffic, load or driving style.
When reading a vehicle specification, record both the number and the test cycle. Comparing an EPA figure with a WLTP figure can still be informative, but it is not as clean as comparing two figures from the same programme. For buying decisions, use official figures as a common starting point, then seek real-world information that fits the driving you actually do.
Measure your own car with the fill-up method
The most repeatable home method is often called brim-to-brim or fill-up-to-fill-up. It measures fuel bought against the distance driven between two comparable fills. No app or conversion can remove ordinary variation, so collect several tanks if you want a dependable average.
- At the first fill, use a consistent stopping point at the pump. Record the odometer or reset the trip meter. Record the date if that helps you track the journey.
- Drive normally until the next fill. A longer interval reduces the influence of a short unusual journey, although do not run the tank excessively low just for the measurement.
- At the second fill, use a similar pump technique and stopping point. Record the litres purchased and the distance travelled since the first fill.
- Calculate L/100km by dividing litres used by kilometres travelled, then multiplying by 100. Calculate km/L by dividing kilometres travelled by litres used.
- Repeat over several fill-ups and use the combined distance and combined litres for a longer-term figure. This smooths one-off traffic, weather and refuelling differences.
Here is a worked example. Suppose the car travelled 540 kilometres and the next fill required 36 litres. Fuel economy is 36 ÷ 540 × 100 = 6.67 L/100km. The same record gives 540 ÷ 36 = 15 km/L. If you prefer MPG, enter either figure in the all-units fuel economy converter rather than rounding the calculation by hand.
A fill-up figure describes that driving period, not an unchanging property of the car. City traffic, motorway speed, a roof box, tyres, air conditioning, towing and cold weather can all move it. Keep notes on unusual conditions if you are comparing tanks.
Use the right figure for the decision
A unit conversion answers a narrow question: what does this stated figure equal in another unit? It cannot tell you whether that stated figure is typical for your driving. Keep the source beside the number. A manufacturer’s official rating, an independent road-test result, a dashboard reading and a multi-tank fill-up average each describe a different kind of evidence.
For a purchase comparison, first make all candidates use one unit, then separate like-for-like official ratings from real-world reports. A household that mostly drives short urban journeys may give more weight to carefully recorded city use than to a combined official rating. Someone planning long motorway trips may make a different choice. The arithmetic remains the same; the question changes.
For a budget, use a consumption figure that reflects your likely use and calculate an estimate with your current local fuel price. It is sensible to try a slightly higher consumption figure as a cautious scenario, particularly when the route includes hills, heavy loads or winter weather. Keep the estimate labelled as an estimate rather than a guaranteed cost.
When you publish or share a fuel figure, include the unit and, where known, the test cycle or the measurement method. “40 MPG” lacks the information needed for a fair comparison; “40 MPG (US), EPA” or “40 MPG (UK), owner fill-up average” says much more. Clear labels prevent the same conversion mistakes that the calculator is designed to solve.
Common conversion mistakes
- Using UK MPG and US MPG as if they were the same. Always identify the gallon before converting.
- Assuming that a high L/100km value is better. It is the opposite: fewer litres per 100 kilometres means lower consumption.
- Comparing a displayed rounded value with an unrounded value. Round only at the final reporting stage where possible.
- Mixing miles and kilometres in a manual fuel-use calculation. Convert the distance first or use one of the site’s tools.
- Comparing ratings produced under different test cycles without marking the difference.
- Treating a one-tank result as a permanent average. Several comparable fill-ups are more informative.
For a specific journey, convert the economy figure first and then use the trip fuel cost calculator with your own distance and price. It is simpler than calculating from an unfamiliar fuel unit while you are also planning the route.
Frequently asked questions
Is 30 MPG US the same as 30 MPG UK?
No. They use different gallon sizes. UK MPG is based on the larger imperial gallon, so the same numeric value represents different consumption. Use the US to UK MPG converter before comparing figures.
What is better: 5 L/100km or 6 L/100km?
5 L/100km is better because it uses one litre less fuel over each 100 kilometres. It equals 20 km/L, while 6 L/100km equals about 16.67 km/L.
Can I convert a real fuel receipt to MPG?
Yes. Divide the distance travelled by the fuel bought in compatible units, then convert the resulting km/L or L/100km using the appropriate calculator. A brim-to-brim record is usually more useful than a single dashboard reading.
Why does my real MPG differ from the official rating?
Official ratings come from controlled test procedures. Your route, speed, temperature, vehicle load, tyres and driving pattern differ, so actual consumption can differ too.
Which unit should I use when comparing cars?
Use the unit you find easiest to interpret, but convert every candidate to the same unit before ranking. L/100km makes absolute fuel use clear; MPG and km/L make distance from each unit of fuel clear. The best choice is the one you apply consistently.