Trip estimate
Total fuel cost
$0.00CO₂ uses US EPA tailpipe factors: 8,887 g per US gallon of gasoline and 10,180 g per US gallon of diesel. Real-world consumption varies with speed, load, weather and driving style.
How the fuel cost calculator works
A trip fuel estimate has three parts: distance, economy and price. First, the calculator estimates the fuel needed. With km/L, fuel needed = distance ÷ km/L. With L/100km, fuel needed = distance × L/100km ÷ 100. It then multiplies fuel needed by the price per litre: cost = fuel × price.
For example, a 300 km journey at 8 L/100km requires 300 × 8 ÷ 100 = 24 litres. At a fuel price of 270 per litre, the estimated cost is 24 × 270 = 6,480 total. The estimate will only be as reliable as the economy and fuel-price figures entered. If you know your figure in MPG, first use the MPG to L/100km converter or the US MPG to km/L converter so that the fuel calculation uses a compatible unit.
Using MPG and price per gallon
MPG already describes distance per gallon, so the calculator can estimate gallons by dividing the trip distance in miles by MPG. Multiply the result by the price per gallon to estimate cost. Be precise about the gallon: US MPG uses a US gallon, while UK MPG uses an imperial gallon. A price per gallon must match the gallon type used by the economy figure.
When a price is quoted per litre but the vehicle figure is in MPG, it is usually clearer to convert the economy to L/100km or km/L first. The UK MPG to L/100km converter and L/100km to US MPG converter help keep the units visible. Do not combine kilometres with MPG or miles with km/L in a manual calculation without converting the distance too.
Round trips and shared costs
For a return journey, enter the full out-and-back distance. If the outbound and return legs have very different conditions, calculate each leg separately and add the results. For a shared journey, divide the estimated total by the agreed number of people only after deciding what is being shared. Some groups split the full fuel cost among all passengers; others leave the driver out of the split to reflect use of the vehicle. The calculator provides a starting figure, not a rule for settling a payment.
How CO₂ is estimated
Where the tool displays a tailpipe CO₂ estimate, it is based on fuel used. The US EPA tailpipe factors are 8,887 g CO₂ per US gallon of gasoline and 10,180 g CO₂ per US gallon of diesel. The calculator multiplies the estimated US gallons by the selected factor. This is a tailpipe estimate, not a full life-cycle emissions calculation. Production, transport, electricity use in hybrids and the exact fuel blend are outside those two figures.
Ways to reduce fuel cost
- Check tyre pressures at the vehicle maker’s recommended setting, especially before a long drive.
- Remove unnecessary weight and roof accessories when they are not needed.
- Combine errands where practical instead of making several separate cold-start trips.
- Use steady acceleration and leave enough space to avoid repeated hard braking.
- Choose a route that suits the trip, considering distance, congestion, hills and reliable fuel prices.
- Keep up with routine maintenance and investigate a noticeable change in consumption.
These steps can help avoid waste, but no fixed saving applies to every car or journey. Weather, traffic and the vehicle’s condition still matter.
Fuel cost calculator FAQs
How do I calculate the fuel cost of a trip?
Work out the fuel needed, then multiply by the fuel price. Fuel needed is the distance multiplied by L/100km and divided by 100, or the distance in miles divided by MPG for gallons. Example: 300 km at 6.5 L/100km uses 19.5 litres; at 1.50 per litre the trip costs 29.25.
Can I use UK MPG with a price per litre?
Yes. Enter the economy in the unit you know (US MPG, UK MPG, L/100km, km/L and more) and the price per litre, US gallon or UK gallon. The calculator converts everything to the same units before it multiplies, so you do not need to convert anything yourself.
Does it work for diesel as well as petrol?
Yes. The cost calculation is the same for any liquid fuel. Choose petrol or diesel only to switch the CO₂ estimate, because burning a litre of diesel releases more CO₂ than a litre of petrol.
Should I enter the dashboard economy reading or my fill-up average?
Use the figure that best represents the trip you are planning. A recent multi-tank fill-up average is often a better planning baseline than a short dashboard reading, especially if conditions vary.
Why did my actual fuel bill differ from the estimate?
Actual fuel use may change with traffic, speed, weather, load and driving style. The price may also change between planning and refuelling, and a pump total can include more or less fuel than the calculated amount.
Does the CO₂ estimate include manufacturing the fuel?
No. The quoted calculation uses the stated US EPA tailpipe factors for fuel burned. It does not estimate upstream or full life-cycle emissions.